SIMULATION

IRON REMOVER&
SMART COOLERBusiness

IRON REMOVER&SMART COOLERBusiness

HIGH EFFICIENCY OF IRON REMOVAL SYSTEM

"Global Robotics Brings World's Best Technology"

We were using the buffoon suction TYPE and magnetic TYPE to remove the spatter and iron generated during welding, but the spatter and iron stuck in the PIN could not be removed. To improve this, Gloval Robotics succeeded in developing and commercialized a system that can completely remove seized iron by applying a brush at the end of the module and supplies it to HKMC and automotive parts plants.

high-efficiency iron remover

  • System Overview

    The use of the buffoon suction TYPE and magnetic TYPE to remove the spactors and iron generated during welding, but the problem was that they were unable to remove the spectors and iron stuck in the PNL.
    To improve this, Global Robotics succeeded in developing a system that can completely remove seized iron by applying a brush at the end of the module, and has commercialized it and supplied it to HKMC and each automotive body part company.

    feature point

    • - Top and bottom through spring between OUTER HOUSING and PAD
    • - Protects products in contact with PANEL with PAD material URETHANE
    • - Use of excellent chemical resistant materials (UR,MC,SUS304 etc.)
    • - Increase suction power through internal sealing structure
    • - Easy A/S with a simple structure
    • - Piping connections and mounting plates can be applied and modified to suit conditions

SRC(SPOT ROBOT COOLER)

  • ▲ system structure diagram
  • ▲ LINE Applied Photograph
  • System Overview

    By developing individual cooling systems, we have improved the problem of removing and installing cooling water pipes each time during LINE installation and previous installation work, which is a disadvantage of the centralized cooling system. In addition, the application of individual cooling systems can reduce the cost of installation and line operation, reduce non-operation time, and increase productivity.

    feature point

    • - Individual coolant temperature management (5 ̊ to 25 ̊)
    • - Individual coolant flow management (6 L to 10L/MIN )
    • - Stop the robot in case of abnormality (alarm function)
    • - Easy individual care by weld type
    • - Spector Reduction Effect
    • - Reduced weld tip wear rate
    • - Securing stable quality
    • - Effect of preventing fusion due to poor cooling